PIR PID Panels

PIR PID Panels

Details
PIR PID Panels are rigid composite panels designed for the fabrication of lightweight pre-insulated HVAC ductwork. The panels combine a rigid PIR foam insulation core with aluminium facings, integrating thermal insulation and duct construction into a single panel system. Designed for on-site fabrication, PIR PID Panels can be cut, grooved, folded, joined and reinforced to produce straight ducts, elbows, reducers, branches and other duct sections according to project requirements. The integrated panel structure helps simplify duct fabrication and installation while providing continuous thermal insulation throughout the finished duct system. It is suitable for a wide range of commercial, industrial and building services HVAC applications where lightweight construction, thermal insulation and efficient fabrication are important considerations.
Category
UNTDuct PIR System
 
Send Inquiry
Description
Technical Parameters

Thanks to its excellent products and quality services, UNT Duct is one of the leading pir pid panels manufacturers and suppliers in China. Welcome to buy the high quality and customized products from our factory. We will offer you the best service and fast delivery.

 

PIR PID Panels

PIR PID Panels feature a rigid polyisocyanurate foam core sandwiched between metal or fabric facings, offering superior thermal insulation (λD as low as 19 mW/m·K), excellent fire resistance (up to 60 minutes). The panel combines thermal insulation, lightweight construction and fabrication efficiency for pre-insulated HVAC ductwork.

 

Structure: Silver Aluminum/ PIR Foam/ Silver Aluminum
Size: 3950*1200*20mm
Foam Density: 50-55kg/m3
Aluminum Thickness: 0.06mm or 0.08mm
Aluminum Color: Silver
Packing: 10 sheets/ package
Loading Capacity: 710 sheets/ 40'HQ (packed with plastic bags)
                                660 sheets/ 40'HQ (packed with cardboard box)

Send inquriy

 

 

PIR Composite Ductwork

Core Advantage of PIR PID Panels 

Air Ducting Panel

PIR PID Panels are what sets this panel apart-it delivers performance that outperforms many traditional insulation materials. Its critical properties include:

 

Exceptional Thermal Insulation:

PIR foam has a lower thermal conductivity which means more thermal efficiency.

 

Closed-Cell Structure:

Unlike open-cell foams, PIR's closed cells trap air (and thus heat) and repel moisture. This prevents mold growth, corrosion, and insulation degradation over time.

 

Low Water Absorption:

The closed-cell PIR foam structure helps limit moisture absorption and maintain insulation performance in humid environments.

 

Fire Resistance:

PIR foam is inherently fire-retardant (meets standards such as ASTM E84, EN 13501-1). It self-extinguishes when exposed to flame and produces minimal toxic smoke-critical for HVAC safety (ducts act as "chimneys" in fires).

Send inquriy

Applicable Scenarios and Industry Compatibility of PIR PID Panels

UNT PIR Pre-Insulated Duct Panels can be considered for HVAC systems where thermal insulation, weight, fabrication efficiency and fire performance are important project considerations.

Commercial HVAC

Suitable for air-conditioning and ventilation ductwork in commercial buildings, offices, shopping centres, hotels and other building services applications.

Data Centers

Can be considered for HVAC and air distribution systems in data center projects where thermal performance, installation efficiency and project-specific fire requirements need to be addressed.

Healthcare Facilities

Suitable for selected HVAC ductwork applications in hospitals, clinics and healthcare facilities, subject to project specifications, hygiene requirements and applicable standards.

Cleanrooms

Can be used in suitable cleanroom HVAC applications where the complete duct system is designed and installed according to the required cleanliness, sealing and environmental conditions.

Industrial HVAC

Suitable for selected industrial ventilation and air-conditioning systems where lightweight duct construction and integrated insulation are beneficial.

Other Building Services Applications

The PIR pre-insulated duct system can also be considered for other HVAC projects according to duct dimensions, pressure requirements, environmental conditions and applicable standards.

Send inquriy

Air Ducting Panel

Why choose UNTDuct

UNTDuct System

Packaging of PIR Duct Board

Packaging of PIR Duct Board

 

Specification

Item

Unit

Specification

Standard Panel Size

mm

3950x1200x20

Alu. Foil Thickness

mm

0.06 or 0.08

Foam Density

kg/m³

50-55

Fire Safety (BS476Part 6&7)

 

Class 0

Thermal Conductivity

W/(m·K)

0.020

Compressing Strength

MPa

0.2

Bending Strength

MPa

2

Water Absorption

%

0.36

Dimension Change

%

0.3

Working Temperature

℃

-60 to +80

Max Pressure in duct

Pa

1500

Maximum Allowable Wind Velocity

m/s

≤15

Max Continuous Running Temperature

℃

≤70

Lifespan of PIR Air Duct

years

>20

PRE-INSULATED DUCT vs G.I. DUCTWORK

Metric

20mm PIR Pre - Insulated Duct
(with 0.08mm Alu. Foil, )

0.5mm G.I Duct + 30mm Rubber Plastic (40-90kg/m3)

Fire Safety

Compliant (Class 0/BS 476, AS 1530.3). Self-extinguishing PIR core, low toxic smoke, non-combustible alu foil.

G.I non-combustible;
rubber plastic fire-retardant but requires coating to meet strict codes.G.I

Thermal Insulation

Excellent.
λ=0.020 W/m·K, no thermal bridging. 20mm integrated structure ensures consistent insulation.

Fair.
λ=0.035 W/m·K, thermal bridging at G.I joints. 30mm insulation offset by metal conductivity.

Hygiene & Air Quality

Superior.
Non-porous alu foil, smooth inner surface, moisture-resistant PIR. Meets cleanroom/hospital standards.

Poor.
Porous rubber plastic traps dust/mold; G.I-insulation gaps breed pathogens.

Lightweight

1.4-1.5 kg/m².
Ultra-light, reduces structural load; ideal for retrofits/timber-framed buildings.

5.1–6.3 kg/m².
Heavy G.I base + bulk insulation; requires reinforced supports.

Energy Efficiency

Excellent.
20–30% lower HVAC energy consumption. Minimizes heat gain/loss in conditioned air.

Low.
20–30% higher energy loss due to inferior insulation and thermal bridging.

Ease of Construction

Easy.
Factory-prefabricated tongue-and-groove joints. No separate insulation step; 40–60% less labor time.

Complex.
Two-step on-site process: G.I duct fabrication + rubber plastic wrapping. Labor-intensive, prone to gaps.

Quiet Operation

Good.
PIR core absorbs 10–15 dB airflow noise; alu foil dampens vibration.

Fair.
Rubber plastic provides basic sound reduction, but G.I vibration and insulation gaps reduce efficiency.

Space Savings

Excellent.
20mm total thickness (all-in-one). Fits tight ceilings/retrofit cavities.

Poor.
30.5mm total thickness (0.5mm G.I + 30mm insulation). Bulky, requires larger installation space.

Environmental Friendliness

Balanced.
CFC/HCFC-free PIR, recyclable alu foil. 20–30-year lifespan; net carbon positive in 1–3 years.

Low.
Rubber plastic non-recyclable; 10–15-year lifespan. Frequent replacement increases waste; higher energy emissions.

Air Leakage

Superior.
≤2% air leakage (EN 1507, AS/NZS 3660.1). Airtight factory joints + alu foil vapor barrier.

Poor.
5–10% air leakage. On-site sealing gaps; separate vapor barrier required.

Performance comparison based on UNT Duct product data and standard system configurations. Actual performance may vary depending on system design, installation method and project conditions. 

How To Make PIR Pre-insulated Straight Duct

Step 1 - Tracing: outline the duct shapes on the panel.

 

Step 2 - Cutting: Using manual cutting tools, cut along the panel edges and create 90 degree "V" grooves on the panel.

 

Step 3 - Gluing: Apply glue to the cutting surfaces of the panels.

 

Step 4 - Folding: After the glue is cured, fold the sides toward each other to form the straight duct.

 

Step 5 - Taping: The tape is applied only to the external seams of the duct where the sides of the panel were joined for air-tightness.

 

Step 6 - Flanging: After applying glue and positioning the steel angle bracket, process to fit the PVC or aluminum invisible flanges.

 

Step 7 - Reinforcement: reinforce the duct with an aluminum reinforcement bar and G.I. Shaped disks, if necessary.

 

Step 8 - Sealing: After the duct is assembled, seal all internal joints hermetically with silicone.

 

Need the complete fabrication solution?
UNT Duct supplies PIR duct panels, fabrication tools, jointing accessories, reinforcement components and related materials for complete pre-insulated duct fabrication.

Contact now

PIR pre-insulated ductwork

Hot Tags: pir pid panels, China, suppliers, manufacturers, factory, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!