PIR Insulation Air Duct

PIR Insulation Air Duct

Details
PIR Insulation Air Duct are rigid composite panels designed for the fabrication of lightweight HVAC ductwork. The panel combines a PIR insulation core with aluminium facings, integrating thermal insulation and duct construction into a single panel system. Designed for on-site fabrication, the panels can be cut, grooved, folded, joined and reinforced to produce straight ducts, elbows, reducers, branches and other duct sections according to project requirements. By combining the duct structure and insulation in one panel, the PIR system can simplify duct fabrication and installation while providing continuous thermal insulation throughout the ductwork.
Category
UNTDuct PIR System
 
Send Inquiry
Description
Technical Parameters

Thanks to its excellent products and quality services, UNT Duct is one of the leading pir insulation air duct manufacturers and suppliers in China. Welcome to buy the high quality and customized products from our factory. We will offer you the best service and fast delivery.

 

PIR Insulation Air Duct

UNTDuctPIR Insulation Air Duct are a primary high-performance solution utilised within modern HVAC systems. Manufactured as an integral sandwich assembly clad with aluminium foil facings and incorporating a rigid PIR foam core, they exhibit better performance than standard galvanised steel ducts which require insulation installation on site. Applicable to diverse engineering projects, such duct panels are frequently selected for hotels, office buildings, airports, hospitals and additional commercial and public buildings.

Technical Parameter Standard Value / Specification
Structure Sandwich panel: Aluminum Foil / PIR Foam / Aluminum Foil
Core Material Polyisocyanurate (PIR) foam
Panel Dimensions 3950mm x 1200mm x 20mm (also available: 2900x1200x20mm)
Foam Density Approx. 52 kg/m³
Thermal Conductivity ≤ 0.020 W/(m·K)
Fire Rating Class 0 (BS476 Part 6&7) or Class A (ASTM E84)
Operating Temperature -50°C to 120°C

 

Send inquiry

PIR Rectangular Duct

Flame-retardant, environmentally friendly and safety indicators of PIR Insulation Air Duct

PIR Air Duct Panel

The PIR substrate inherently contains flame-retardant molecular chains, eliminating the need for additional flame-retardant additives. The oxygen index measured is ≥ 32, meeting the B1-level non-flammable standard. When exposed to open flame, the surface undergoes carbonization to seal the air holes, without any molten droplets, with a smoke density level of s2, a smoke toxicity level of t1, and meeting the fire protection standards for large supermarkets, hospitals, office buildings, rail transit ventilation and heating systems.

 

 

The production process of the product does not involve the use of Freon foaming, and does not contain harmful substances such as formaldehyde and benzene series. The VOC release is lower than the national standard limit by 75%. After completion, the air duct system does not need to be left idle to disperse odors, and the machine room and clean workshop can be put into use immediately upon completion. Waste materials can be crushed for recycling and reprocessing, and the solid waste pollution is much lower than that of rock wool and glass wool air duct materials.

Send inquiry

 

The packing and container loading of PIR Insulation Air Duct

PIR Insulation Air Duct

Regular Size: 3950*1200*20mm/ 2900*1200*20mm

PIR Foam Density: 50-55kg/m3,

Weight: about 1.4kg/m2

Packing: 10 sheets/ paper carton

 

 

 

Container Loading:

40'HQ Container: 3950/2900*1200*20mm, 10 sheets packed in one carton, total 660sheets (3950mm) / 880sheets(2900mm).

20'GP Container: 2900*1200*20mm, 10 sheets packed in one carton, total 400sheets.

Send inquiry

Packing of PIR Insulation Air Duct

Why choose UNTDuct

 

UNT Duct Panel

What is UNTDuct System?

UNT Duct System

 

Specification

Item

Unit

Specification

Standard Panel Size

mm

3950x1200x20

Alu. Foil Thickness

mm

0.06 or 0.08

Foam Density

kg/m³

50-55

Fire Safety (BS476Part 6&7)

 

Class 0

Thermal Conductivity

W/(m·K)

0.020

Compressive Strength

MPa

0.2

Bending Strength

MPa

2

Water Absorption

%

0.36

Dimension Change

%

0.3

Working Temperature

℃

-60 to +80

Max Pressure in duct

Pa

1500

Maximum Allowable Wind Velocity

m/s

≤15

Max Continuous Running Temperature

℃

≤70

Lifespan of PIR Air Duct

years

>20

PRE-INSULATED DUCT vs G.I. DUCTWORK

Metric

20mm PIR Pre - Insulated Duct
(with 0.08mm Alu. Foil, )

0.5mm G.I Duct + 30mm Rubber Plastic (40-90kg/m3)

Fire Safety

Compliant (Class 0/BS 476, AS 1530.3). Self-extinguishing PIR core, low toxic smoke, non-combustible alu foil.

G.I non-combustible;
rubber plastic fire-retardant but requires coating to meet strict codes.G.I

Thermal Insulation

Excellent.
λ=0.020 W/m·K, no thermal bridging. 20mm integrated structure ensures consistent insulation.

Fair.
λ=0.035 W/m·K, thermal bridging at G.I joints. 30mm insulation offset by metal conductivity.

Hygiene & Air Quality

Superior.
Non-porous alu foil, smooth inner surface, moisture-resistant PIR. Meets cleanroom/hospital standards.

Poor.
Porous rubber plastic traps dust/mold; G.I-insulation gaps breed pathogens.

Lightweight

1.4-1.5 kg/m².
Ultra-light, reduces structural load; ideal for retrofits/timber-framed buildings.

5.1–6.3 kg/m².
Heavy G.I base + bulk insulation; requires reinforced supports.

Energy Efficiency

Excellent.
20–30% lower HVAC energy consumption. Minimizes heat gain/loss in conditioned air.

Low.
20–30% higher energy loss due to inferior insulation and thermal bridging.

Ease of Construction

Easy.
Factory-prefabricated tongue-and-groove joints. No separate insulation step; 40–60% less labor time.

Complex.
Two-step on-site process: G.I duct fabrication + rubber plastic wrapping. Labor-intensive, prone to gaps.

Quiet Operation

Good.
PIR core absorbs 10–15 dB airflow noise; alu foil dampens vibration.

Fair.
Rubber plastic provides basic sound reduction, but G.I vibration and insulation gaps reduce efficiency.

Space Savings

Excellent.
20mm total thickness (all-in-one). Fits tight ceilings/retrofit cavities.

Poor.
30.5mm total thickness (0.5mm G.I + 30mm insulation). Bulky, requires larger installation space.

Environmental Friendliness

Balanced.
CFC/HCFC-free PIR, recyclable alu foil. 20–30-year lifespan; net carbon positive in 1–3 years.

Low.
Rubber plastic non-recyclable; 10–15-year lifespan. Frequent replacement increases waste; higher energy emissions.

Air Leakage

Superior.
≤2% air leakage (EN 1507, AS/NZS 3660.1). Airtight factory joints + alu foil vapor barrier.

Poor.
5–10% air leakage. On-site sealing gaps; separate vapor barrier required.

Performance comparison based on UNT Duct product data and standard system configurations. Actual performance may vary depending on system design, installation method and project conditions.

How To Make PIR Pre-insulated Straight Duct

Step 1 - Tracing: outline the duct shapes on the panel.

 

Step 2 - Cutting: Using manual cutting tools, cut along the panel edges and create 90 degree "V" grooves on the panel.

 

Step 3 - Gluing: Apply glue to the cutting surfaces of the panels.

 

Step 4 - Folding: After the glue is cured, fold the sides toward each other to form the straight duct.

 

Step 5 - Taping: The tape is applied only to the external seams of the duct where the sides of the panel were joined for air-tightness.

 

Step 6 - Flanging: After applying glue and positioning the steel angle bracket, process to fit the PVC or aluminum invisible flanges.

 

Step 7 - Reinforcement: reinforce the duct with an aluminum reinforcement bar and G.I. Shaped disks, if necessary.

 

Step 8 - Sealing: After the duct is assembled, seal all internal joints hermetically with silicone.

 

Need the complete fabrication solution?

UNT Duct supplies PIR duct panels, fabrication tools, jointing accessories, reinforcement components and related materials for complete pre-insulated duct fabrication.

Contact now

PIR pre-insulated ductwork

Hot Tags: pir insulation air duct, China, suppliers, manufacturers, factory, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!