Production Process of PIR/PU Pre-insulated Duct Panels
The production process of PIR (Polyisocyanurate) and PU (Polyurethane) pre-insulated duct panels involves several key steps, integrating precise material handling, chemical reactions, and quality control measures to ensure the final product meets stringent thermal insulation, mechanical, and fire safety standards.
1. Raw Material Preparation
The primary raw materials for PIR/PU pre-insulated duct panels are polyols, isocyanates, catalysts, blowing agents, and additives. For PIR panels, polyols with high functionality are selected to promote the formation of the rigid isocyanurate ring structure, enhancing fire resistance. In contrast, PU panels use polyols tailored to achieve specific flexibility or rigidity. Isocyanates, typically diphenylmethane diisocyanate (MDI), react with polyols to form the polymer matrix. Catalysts, such as tertiary amines and organotin compounds, accelerate the reaction rate, while blowing agents like pentane or hydrofluorocarbons (HFCs) create the cellular structure that provides insulation. Additives, including flame retardants, stabilizers, and pigments, are incorporated to meet specific performance requirements. These raw materials are stored in separate tanks and precisely measured according to the formulation before entering the production line.

2. Mixing and Blending
The measured raw materials are fed into a high-speed mixing head. Inside the mixing head, polyols, catalysts, blowing agents, and additives are first mixed thoroughly in a pre-mixing chamber. Then, the isocyanate is introduced into the main mixing chamber, where it rapidly reacts with the polyol mixture. The high-speed agitation ensures homogeneous dispersion of all components, initiating the exothermic polymerization reaction. The mixing time is carefully controlled, usually within a few seconds, to prevent premature curing and ensure consistent foam quality.

3. Panel Formation
There are different methods for forming PIR/PU pre-insulated duct panels, with the continuous laminator process being widely used. In this process, the mixed liquid foam is poured onto a moving lower metal or polymer facing sheet. The facing sheet, pre-coated with an adhesive layer to enhance bonding with the foam core, moves through a laminator. Simultaneously, an upper facing sheet is placed on top of the expanding foam. The foam expands under the influence of the blowing agent and fills the space between the two facing sheets, forming a sandwich structure. The laminator applies controlled pressure and temperature to ensure proper bonding between the foam core and the facing sheets and to guide the foam expansion in a uniform manner, shaping it into the desired panel thickness and width.

4. Curing and Cooling
After the panel formation, the PIR/PU foam undergoes a curing process. During this stage, the chemical reactions within the foam continue to complete, enhancing its mechanical strength and dimensional stability. The panels are conveyed through a curing oven or tunnel, where they are maintained at an elevated temperature (usually around 60 - 80°C) for a specific period, typically 10 - 30 minutes, depending on the panel thickness and formulation. Once cured, the panels are transferred to a cooling section, where they are cooled down to room temperature using forced air or water-cooled systems. Proper cooling is crucial to prevent thermal stress and ensure the panels maintain their shape and properties.

5. Cutting and Trimming
Cooled panels are then cut to the required lengths and sizes using precision cutting equipment, such as circular saws or guillotine cutters. The cutting process must be accurate to ensure that the panels fit together seamlessly during installation. Additionally, any excess material or irregular edges are trimmed to achieve smooth, clean surfaces. Specialized cutting tools are often used to create grooves, notches, or other features required for duct assembly, such as tongue-and-groove joints for easy installation and airtight connections.

6. Quality Control
Throughout the production process, strict quality control measures are implemented. Incoming raw materials are tested for purity, viscosity, and other critical properties to ensure they meet the specified standards. During production, the density, thickness, and surface finish of the panels are continuously monitored. Samples are regularly taken for laboratory testing, including measuring thermal conductivity to assess insulation performance, conducting fire resistance tests to ensure compliance with safety regulations, and performing mechanical strength tests to evaluate load-bearing capacity and durability. Panels that do not meet the quality requirements are rejected, and adjustments are made to the production process as needed.

7. Packaging and Storage
Qualified PIR/PU pre-insulated duct panels are carefully packaged to protect them from damage during transportation and storage. They are often wrapped in plastic films or placed in cardboard boxes. Stacking methods are optimized to prevent deformation of the panels. The packaged panels are stored in a dry, ventilated environment away from direct sunlight and moisture to maintain their quality until they are ready for shipment to customers.
This comprehensive production process ensures that PIR/PU pre-insulated duct panels possess excellent thermal insulation, mechanical strength, and fire resistance, making them suitable for a wide range of applications in the building ventilation and air conditioning systems.

Stocking

Loading of pre-insulated duct panels

