Thanks to its excellent products and quality services, UNT Duct is one of the leading pur insulation air ducting manufacturers and suppliers in China. Welcome to buy the high quality and customized products from our factory. We will offer you the best service and fast delivery.
PUR Insulation Air Ducting
consist of Polyurethane (PU) insulation foam and aluminum foil or aluminum sheet on both sides. It is energy saving and environment-friendly, and widely used for HVAC duct system.
Compared with traditional galvanized Iron (steel metal) ductwork, PUR Insulation Air Ducting has offer a high performance, light weight and robust system that requires only a single fix installation process. It had become more and more popular all over the world. According to different application or project requirement, the facing of PU panel can be 60 or 80 micron aluminum foil, 150 micron aluminum sheet and pre-painted GI sheet.
Panel Structure: Silver Alu. / PU Foam / Silver Alu. Sheet
Foam Density: 40-45kg/M3
Panel Dimension: 3950mm*1200mm*20mm
Alu. Foil: 60 Micron (Embossed)

Installation and Maintenance of PUR Insulation Air Ducting
01.
Modular installation
Standardized production of panels (standard size 1200mm×3950mm, customizable length available), fixed by tongue and groove splicing or bolts. The average daily installation area per person can reach 30 square meters, which shortens the construction period by 50% compared with traditional on-site spray insulation.
02.
Low maintenance cost
The surface coating is easy to clean and only requires wiping to remove dust on a daily basis. If there is local damage, it can be filled with a special PU repair agent without the need for overall replacement. Its service life can reach 15 to 20 years, during which no frequent maintenance is required.
Specification of PUR Insulation Air Ducting
|
Item |
Unit |
Specification |
|
Standard Panel Size |
mm |
3950*1200*20 |
|
Alu. Foil Thickness |
mm |
0.06 or 0.08 |
|
Foam Density |
kg/m3 |
40-45 |
|
Fire Safety (BS476Part 6&7) |
|
Class 0 |
|
Thermal Conductivity |
w/m.k |
0.020 |
|
Compressing Strength |
Mpa |
0.2 |
|
Bending Strength |
Mpa |
2 |
|
Water Absorption |
% |
≤0.1 |
|
Dimension Change |
% |
0.3 |
|
Working Temperature |
℃ |
-60 to +80 |
|
Max Pressure in duct |
Pa |
1500 |
|
Maximum Allowable Wind Velocity |
m/s |
≤15 |
|
Max Continuous Running Temperature |
℃ |
≤70 |
|
Lifespan of PU Air Duct |
years |
>20 |




Advantages of PUR Insulation Air Ducting
High thermal insulation
with a thermal conductivity value of 0.020w/m.k allows for maximum exploitation of air handling unit capacity, increasing efficiency and reducing operating costs.
Extremely light weight
Compared to sheet metal ducts allows a reduction of weight on the structures, supporting points, workmanship costs and materials necessary for the installation.
Air-tightness
Air-tightness of UNTDuct PU System is eight times more than traditional ducts
Hygiene and cleanliness
The use of aluminum for the internal surfaces of the ducts ensures hygiene and cleanliness, it also has a beautiful appearance and is suitable for the food industry
Good acoustic behavior
The sandwich structure (aluminum – insulating material – aluminum) guarantees a good acoustic behavior. Vibration and reverberation are stopped by the insulating material, contributing to a higher comfort in the environment where UNTDuct is installed.
Job Site Fabrication Saving Cost
It is easy to manufacture ducts at job site with considerable advantages on transport costs.
Fire Safety
UNTDuct PU Panels have a low participation in fire, do not drop and smokes have a reduced opacity and toxicity. UNTDuct PUR Insulation Air Ducting is in conformity with the requirements of the most restrictive international regulations.
Sturdiness, Rigidity
The outer aluminum coating coupled with the insulating material provides sturdiness, rigidity and good resistance to corrosion, erosion and deformation even in special applications.
Why choose UNTDuct

Project Case of UNT

PRE-INSULATED DUCT vs G.I. DUCTWORK
|
|||||||||||||||||||||||||||||||||||
| Performance comparison based on UNT Duct product data and standard system configurations. Actual performance may vary depending on system design, installation method and project conditions. |
How To Make PU Pre-insulated Straight Duct

Step 1 - Tracing: outline the duct shapes on the panel.
Step 2 - Cutting: Using manual cutting tools, cut along the panel edges and create 90 degree "V" grooves on the panel.
Step 3 - Gluing: Apply glue to the cutting surfaces of the panels.
Step 4 - Folding: After the glue is cured, fold the sides toward each other to form the straight duct.
Step 5 - Taping: The tape is applied only to the external seams of the duct where the sides of the panel were joined for air-tightness.
Step 6 - Flanging: After applying glue and positioning the steel angle bracket, process to fit the PVC or aluminum invisible flanges.
Step 7 - Reinforcement: reinforce the duct with an aluminum reinforcement bar and G.I. Shaped disks, if necessary.
Step 8 - Sealing: After the duct is assembled, seal all internal joints hermetically with silicone.
Need the complete fabrication solution?
UNT Duct supplies PU duct panels, fabrication tools, jointing accessories, reinforcement components and related materials for complete pre-insulated duct fabrication.
Hot Tags: pur insulation air ducting, China, suppliers, manufacturers, factory, customized






