Pre-insulated PU Foam Duct Panels

Pre-insulated PU Foam Duct Panels

Details
Advantages of UNTDuct PU Pre-insulated HVAC Ductwork:
1. Lower heat conductivity, higher thermal efficiency
2. Low density, light weight
3. Foamed with CFC free materials, environment protective
4. Hermetic seal ensures little air leakage
Category
UNTDuct PU System
 
Send Inquiry
Description
Technical Parameters

 

I.Key Performance of Pre-insulated PU Foam Duct Panels
HVAC Ductwork Panels

Ultra-low thermal conductivity, outstanding insulation and energy-saving performance:

The closed-cell rate of the core polyurethane foam is over 90%, and the thermal conductivity is as low as 0.02-0.022 W/(m · K), far superior to traditional insulation materials such as glass wool (0.035 W/(m · K)) and rock wool (0.040 W/(m · K)).

It can effectively reduce the cold/heat loss of air ducts, lowering the energy consumption of the HVAC system by 15% to 20%. Long-term operation can significantly reduce electricity costs.

PIR air duct panels

Moisture-proof and anti-condensation, with strong stability:

The closed-cell structure blocks water vapor penetration, so even in high-humidity environments (such as underground garages and food workshops), there will be no phenomenon of the insulation layer getting damp and moldy.

The outer protective film (such as aluminum foil) further enhances the sealing performance, preventing corrosion or wall damage caused by condensation water adhering to the outer wall of the air duct, and extending the service life of the air duct to 15-20 years.

pre insulated air duct board

Lightweight and high strength, impact-resistant and aging-resistant:

The density of the finished board is only 30-40 kg/m³, and its weight is over 50% lighter than the traditional "air duct + insulation layer" combination, significantly reducing the load-bearing pressure on the building ceiling.

Polyurethane foam also has excellent impact resistance. The outer metal composite layer can withstand daily collisions and ultraviolet radiation, maintaining stable performance within the temperature range of -40 ℃ to 80℃, and is suitable for extreme environments such as severe cold and high temperature. ​

 

 

External /Internal Use:
 

Panel Structure: Silver Embossed Alu. Foil/ PU Foam / Silver Alu. Foil

Foam Density: 50kg/m³

Panel Dimension: 3950mm*1200mm*20mm

Alu. Foil: 60 Micron (Embossed)

Alum. Foil : 60 Micron (Embossed)

20mm PUR duct boards
 
 
Installation Process of Pre-insulated PU Foam Duct Panels
making duct model 3

 

 

Hot Tags: Pre-insulated PU Foam Duct Panels, China, suppliers, manufacturers, factory, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!