PU Foam Composite Panel

PU Foam Composite Panel

Details
The PU foam composite board is made by vacuum pressure compounding with polyurethane rigid foam as the core material, combined with color steel, aluminum foil or fiberglass composite panels. Its closed-cell structure results in a thermal conductivity as low as 0.018 - 0.022 w/m·K, making it outstanding in terms of heat insulation and preservation.
The product is lightweight, high-strength, flame-retardant, moisture-proof and corrosion-resistant. It can adapt to various working conditions ranging from -30℃ to 80℃. It supports customization of thickness and size, and the installation is convenient without the need for secondary insulation procedures. It is widely used in HVAC ducts, industrial buildings, cold chain cold storage and other fields, and is the preferred material for high-end energy-saving and insulation purposes.
Category
UNTDuct PU System
 
Send Inquiry
Description
Technical Parameters

Thanks to its excellent products and quality services, UNT Duct is one of the leading pu foam composite panel manufacturers and suppliers in China. Welcome to buy the high quality and customized products from our factory. We will offer you the best service and fast delivery.

 

PU Foam Composite Panel

 

PU Foam Composite Panel

It is a high-performance ventilation duct product, which is widely used in HVAC systems. The following is a detailed introduction:

 

Basic Structure: It is a sandwich structured panel. The core is Polyurethane(PU) foam, which is a closed-cell insulating material. The two outer layers are aluminum sheets or aluminum foils.

 

Panel Structure: Silver Alu. Foil/ PU Foam/ Silver Alu. Foil
Foam Density: 40-45kg/CBM
Panel Dimension: 3950mm*1200mm*20mm
Alu. Foil: 60 or 80 Micron (Embossed)
Fire Rating: Class 0 (BS476Part 6&7)

PIR Air Duct

 

 

Excellent Core Performance of PU Foam Composite Panel

PU Foam Composite Panel

The core advantage of this product stems from the closed-cell structure of the polyurethane core material (with a closed-cell rate of ≥ 97%). Its thermal conductivity is much lower than that of traditional insulation materials such as rock wool and XPS, significantly reducing heat and cold conduction losses. It is an efficient solution for insulation and heat preservation.


At the same time, its physical properties are outstanding. The flat compressive strength is ≥ 0.18 MPa, and the side compressive strength is ≥ 2.0 MPa. The weight is approximately 1.35 - 1.4 kg/m², achieving a combination of light weight and high strength, and it is not prone to deformation or collapse.


The conventional products meet the B1-level flame retardant standard. They carbonize when exposed to fire and have low smoke emissions. The water absorption rate is ≤ 0.2%, which effectively prevents condensation and corrosion. They also have sound insulation and vibration reduction, electrical insulation properties, and can adapt to various complex industrial, cold chain, and HVAC conditions.

Convenient and Efficient Construction of PU Foam Composite Panel

The product adopts an integrated molding process, and is delivered with an insulation layer. No additional insulation treatment is required during on-site construction. Combined with the aluminum profile quick-installation structure, it enables single-step fixed installation, significantly reducing the project duration.


Its lightweight feature reduces the labor and equipment costs for transportation and hoisting. The panels can be cut on-site to produce irregular parts, suitable for complex construction environments.


From a long-term usage perspective, the product is resistant to corrosion and aging, without screw holes or connection ports, reducing leakage problems. The service life exceeds 20 years. Only simple maintenance is required in the later stage. Compared with traditional insulation materials, it can effectively reduce the overall cost throughout the life cycle.

pre-insulated pu air duct foam board

Strong Customization of PU Foam Composite Panel

Polyurethane Air Duct Panel

 

The product supports customized production. There are over 40 options for the regular thickness, and the maximum size of the sheet can reach 3.95X1.2M. The core material density can be adjusted according to the customer's insulation requirements. The low-density is 40-45kg/m3, and the high-density is 50-55kg/m3. The panel material can be flexibly selected from color steel, aluminum foil, aluminum plate, etc.


In addition, according to the requirements of different countries and regions, different standards such as EN 13501-1 and GB 8624 can be provided for flame retardant testing certification to meet the personalized adaptation needs for foreign trade exports and various industries.

 

Hot Tags: pu foam composite panel, China, suppliers, manufacturers, factory, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!