I. The packing and container loading of Aluminum Duct Board:
PIR Pre-insulated (PI) Duct Sheets:
Regular Size: 3950*1200*20mm/ 2900*1200*20mm
PIR Foam Density: 52kg/m3,
Weight: about 1.4kg/m2
Packing: 10 sheets/ paper carton
Container Loading:
40'HQ Container: 3950/2900*1200*20mm, 10 sheets packed in one carton, total 660sheets (3950mm) / 880sheets(2900mm).
20'GP Container: 2900*1200*20mm, 10 sheets packed in one carton, total 400sheets.


FAQs of Aluminum Duct Board
Do PIR pre-insulated (PI) ducts require additional insulation after installation?
No. Unlike traditional steel ducts (which need separate insulation layers like fiberglass), PIR pre-insulated panels are factory-insulated with integrated facing. This eliminates the need for secondary insulation work, saving time and labor.
In which scenarios is PIR pre - insulated duct sheet suitable?
It is widely used in commercial buildings such as offices, shopping malls, and hotels, as well as in residential complexes, industrial facilities, healthcare and food processing facilities, and cold storage and refrigeration systems.
How is PIR pre - insulated duct sheet packaged?
-It is usually packaged in plastic film or cartons, with 10 sheets per package.
How to maintain PIR pre-insulated (PI) ducts?
Maintenance is minimal. Regular inspections for joint tightness (to prevent air leakage) and surface damage (e.g., punctures in aluminum facing) are recommended. Cleaning the inner surface periodically (with mild detergents) helps maintain airflow efficiency, especially in hygiene-sensitive areas.
II. Core Performance of Aluminum Duct Board

Thermal insulation: Thermal conductivity ≤0.03W/(m · K), which is far superior to traditional iron sheet air ducts (requiring additional insulation layers). It can reduce the energy consumption of air conditioning/fresh air systems, minimize heat loss in winter, and prevent condensation in summer.
Sound insulation: The porous structure of the core material can absorb the noise of the airflow inside the air duct, with an air sound insulation of ≥25dB, solving the "wind noise" problem during the operation of traditional air ducts. It is suitable for scenarios with noise reduction requirements such as schools and office buildings.
Corrosion resistance: The aluminum foil layer is resistant to acids, alkalis and moisture. It is less likely to rust in damp environments such as basements and kitchens, and its service life is 5 to 8 years longer than that of iron sheet air ducts.
Iii. Installation Advantages of Aluminum Duct Board

Lightweight: It weighs only 1/3 of traditional iron sheet air ducts (about 8-12kg/㎡), without the need for heavy hoisting equipment. Manual handling is sufficient, and the installation efficiency is increased by 40%.
Easy to process: It can be directly cut with a utility knife without complex processes such as welding and crimping. On-site adjustments can be made according to the size, reducing the generation of waste materials.
Good sealing: The joints are connected with special aluminum foil tape or flanges, with a leakage rate of ≤2% (the national standard requirement is ≤10%), reducing system energy consumption loss and lowering the later operation and maintenance costs.
Hot Tags: Aluminum Duct Board, China, suppliers, manufacturers, factory, customized
