Thanks to its excellent products and quality services, UNT Duct is one of the leading pu duct manufacturers and suppliers in China. Welcome to buy the high quality and customized products from our factory. We will offer you the best service and fast delivery.
PU Duct
It is a high-performance ventilation duct product, which is widely used in HVAC systems. The following is a detailed introduction:
Basic Structure: It is a sandwich structured panel. The core is polyurethane (PU) foam, which is a closed-cell insulating material. The two outer layers are aluminum sheets or aluminum foils.
Panel Structure: Silver Alu. Foil/ PU Foam/ Silver Alu. Foil
Foam Density: 50kg/CBM
Panel Dimension: 3950mm*1200mm*20mm or 2900*1200*20mm
Alu. Foil: 60 or 80 Micron (Embossed)
Fire Rating: Class 0 (BS476Part 6&7) or Class A (ASTM E84)

Main performance of PU Duct
The core energy-saving advantages are prominent
The PU air duct adopts an integrated molding structure without cold Bridges. The measured heat transfer coefficient can be controlled below 0.35W/(㎡ · K), which is far superior to the limit requirement of 0.6W/(㎡ · K) stipulated in the national "General Specification for Building Energy Conservation and Renewable Energy Utilization", and can significantly reduce the cold and heat loss of the air conditioning and ventilation system. At the same time, its low air leakage rate (≤1%) can prevent energy waste caused by wind loss, and is especially suitable for scenarios such as data centers where PUE values are strictly controlled.
It combines security and adaptability
Leading enterprises have achieved technological breakthroughs in B1-level fire protection and low smoke and non-toxicity, meeting the safety standards of special scenarios such as rail transit. Some PU air ducts can also be equipped with built-in metal wires to achieve anti-static effects, and they do not contain phthalates, making them safe for application in clean fields such as food processing and health care. Its temperature resistance range of -30 ℃ to 90℃ can also meet the ventilation requirements of multi-temperature working conditions such as cold chain storage.
The construction and operation and maintenance costs are controllable
Compared with traditional galvanized steel plate air ducts, PU air ducts are lighter in weight, which can significantly reduce transportation and hoisting costs. Moreover, they support BIM digital pre-assembly, which can shorten the construction period by more than 30%. Throughout its entire life cycle, no additional insulation layer is required, which can reduce the frequency of later maintenance. The comprehensive usage cost is 15% to 20% lower than that of traditional air ducts.
Market Application of PU Duct

The substitution and penetration of traditional scenarios
In the field of green buildings, PU air ducts have reached an application ratio of 18.7% in national green building projects in 2023 due to their compliance with the star-rated green building evaluation standards. It is expected that this proportion will exceed 30% by 2025. In cold chain warehousing scenarios, its excellent anti-condensation and insulation performance has made it the preferred material for cold storage ventilation systems, gradually replacing traditional air ducts such as phenolic ones.
Demand pull from emerging scenarios
In the field of rail transit, with over 6,000 kilometers of metro lines under construction across the country, the demand for fireproof and lightweight air ducts has driven a rapid increase in the penetration rate of flame-retardant PU air ducts. In the field of data centers, the hard requirement of a PUE value of no more than 1.25 has made high-airtightness PU air ducts a necessity, and the market share of high-end customized products is increasing year by year. In addition, its wear-resistant and chemical-resistant properties also make it suitable for material transportation scenarios in industries such as mining and ceramics.
Policies and Industry Trends of PU Duct
Market expansion driven by policies
The national "dual carbon" strategy and policies such as the "Technical Standard for Nearly Zero Energy Buildings" have clearly defined the demand for energy-saving ventilation materials.
The goal of having prefabricated buildings account for over 30% by 2025 will further promote the application of PU air ducts as core components of prefabricated ventilation. It is expected that the application ratio of PU air ducts in new buildings will increase from 12% to over 25% by 2025.
The competitive landscape of the industry is differentiated
At present, the CR5 of the PU air duct industry is approximately 38%, and an absolute monopoly has not yet been formed. The Yangtze River Delta and the Pearl River Delta have gathered over 70% of the national production capacity, while the production capacity of Jiangsu and Guangdong provinces accounts for more than 45%.
Leading enterprises are shifting from single-product sales to full-cycle services of "product + operation and maintenance", while small and medium-sized manufacturers may face capacity clearance if they fail to achieve technological upgrades. Due to the disadvantage of localization costs, foreign brands are being replaced by domestic brands in the mid-range market.

Hot Tags: pu duct, China, suppliers, manufacturers, factory, customized
