Duct Insulation Board

Duct Insulation Board

Details
Duct insulation boards are panels used for thermal insulation and sound absorption in ventilation and air - conditioning ducts. They can improve the energy efficiency of the system and reduce noise transmission.
Category
UNTDuct PU System
 
Send Inquiry
Description
Technical Parameters

 

 

Duct insulation board Core Functions and Operating Principles

Thermal Insulation and Energy Saving

When air ducts carry hot or cold air, heat exchange easily happens due to temperature differences with the outside (like cold loss in summer and heat loss in winter). The insulation board, with low thermal conductivity, forms a heat-insulating layer on ducts, reducing cold or heat loss. This cuts down the energy use of air-conditioning units and boosts the system's energy efficiency.

 

Sound Absorption and Noise Reduction

During ventilation system operation, noise comes from fan and air duct vibrations and air flow disturbance. Some insulation boards, like centrifugal glass wool with porous structures, absorb sound wave energy via air viscous resistance and fiber vibration friction. This reduces noise transmission to indoors or the surroundings, improving the acoustic environment.

 

Protection and Moisture Resistance

High - quality insulation boards can reduce condensation on the surface of air ducts (especially in high - humidity environments). This prevents condensed water from eroding the air ducts or surrounding building structures, extends the service life of the air ducts, and at the same time prevents the growth of mold that could affect indoor air quality.

 

 

 
Duct Insulation Board
 
Aluminum-Faced PU Pre-insulated Duct Panel
PU duct Insulation Board
Phenolic Foam Board
Phenolic duct Insulation Board
PU Pre-insulated Ductwork System
PIR duct Insulation Board
Duct Insulation Board
Duct Insulation Board

 

PU duct Insulation Board VS Phenolic duct Insulation Board

 

There are various types of materials for duct insulation boards, and the performance of different materials varies significantly. Selection should be based on specific scenarios.

 

Performance Category Specific Indicator Phenolic Foam Polyurethane
Fire Performance Fire Rating Naturally meets B1 - level fire safety standards without adding flame retardants Requires addition of flame retardants to reach B1 level
Flame Penetration Resistance Forms a "graphite foam" layer at high temperatures, with flame penetration resistance time up to 1 hour Forms a carbon deposit layer on the surface during combustion to block flames, but fire performance is weaker than phenolic foam
Combustion Products Low smoke density (5.0%), only releases a small amount of CO gas, non - toxic -
Thermal Insulation Performance Thermal Conductivity Approximately 0.023 W/(m・K) (lower after modification), equivalent to or better than polyurethane Low (approximately 0.023 - 0.034 W/(m・K)), but may increase with blowing agent replacement
Temperature Resistance Range Short - term: - 200℃~200℃; Long - term: -140℃~160℃, better than polyurethane Softening point above 250℃, prone to decomposition at high temperatures
Physical Properties Density and Strength Density: 30 - 80kg/m³; Modified compressive strength reaches 650.26kPa, anti - chalking Closed - cell structure, good pressure resistance, but long - term creep may affect stability
Weather Resistance Non - water absorbent, resistant to acids and alkalis (except strong alkalis), good dimensional stability Low long - term water absorption, suitable for high - humidity environments, but needs to prevent blowing agent replacement

 

The packing and container loading of Duct insulation board

 

 

Duct insulation board :

Regular Size: 3950*1200*20mm/ 2900*1200*20mm

PIR Foam Density: 52kg/m3,

Weight: about 1.4kg/m2

Packing: 10 sheets/ paper carton

Container Loading:

40'HQ Container: 3950/2900*1200*20mm, 10 sheets packed in one carton, total 660sheets (3950mm) / 880sheets(2900mm).

20'GP Container: 2900*1200*20mm, 10 sheets packed in one carton, total 400sheets.

Packing of Phenolic Pre-insulated Duct Panels

 

Item

Unit

Specification

Panel Structure

 

Alu./Foam/Alu.

Standard Panel Size

mm

3950*1200*20

Alu. Foil Thickness

mm

0.06

Foam Density

kg/m3

48

Thermal Conductivity

w/m.k

0.022

Compressing Strength

Mpa

0.2

Bending Strength

Mpa

2

Water Absorption

%

0.36

Dimension Change

%

0.3

Working Temperature

℃

-100 to +80

Maximum Allowable Wind Velocity

m/s

≤12

Continuous Running Maximum Temperature

℃

≤70

Lifespan of PU Air Duct

years

>20

Hot Tags: duct insulation board, China, suppliers, manufacturers, factory, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!