Pre-insulated Panels

Pre-insulated Panels

Details
The pre-insulated foam panel (pre-fabricated foam panel) is a prefabricated building material that integrates foam core material (PU/PIR) with double-sided protective facing layers. It has core advantages such as light weight, high strength, heat insulation, and waterproofing. It can be standardizedly produced in the factory and directly assembled and installed on-site, significantly shortening the construction period.
It is widely applicable in scenarios such as food clean workshops, pharmaceutical cold storage rooms, and mobile prefabricated buildings, balancing energy-saving benefits and space usability. It is an ideal component for efficient and low-carbon buildings.
Category
UNTDuct PIR System
 
Send Inquiry
Description
Technical Parameters

Thanks to its excellent products and quality services, UNT Duct is one of the leading pre-insulated panels manufacturers and suppliers in China. Welcome to buy the high quality and customized products from our factory. We will offer you the best service and fast delivery.

 

Pre-insulated Panels

 

Pre-insulated Panels

It is a high-performance ventilation duct product, which is widely used in HVAC systems. The following is a detailed introduction:

 

Basic Structure: It is a sandwich structured panel. The core is polyisocyanurate (PIR) foam, which is a closed-cell insulating material. The two outer layers are aluminum sheets or aluminum foils.

 

Panel Structure: Silver Alu. Foil/ PIR Foam/ Silver Alu. Foil
Foam Density: 55kg/CBM
Panel Dimension: 3950mm*1200mm*20mm
Alu. Foil: 60 or 80 Micron (Embossed)
Fire Rating: Class 0 (BS476Part 6&7)

Pre-insulated Panels

 

certification of Pre-insulated Panels
 
 

Fire Safety, Thermal Conductivity and Physical Performance

UNTDuct PIR Fire Safety BS476 Part 6&7

BS 476 Part 6&7

PIR Fire Safety ASNZS 1530.3

ASNZS 1530.3

Thermal Conductivity Thermal Resistance of PU Pre-insulated Aluminum Duct

thermal Conductivity

Physical Property of Pre-insulated Duct

Compress Strength

CFC HCFC Free

CFC HCFC Free

 

How to make Air Ducts with Pre-insulated Panels
 

The fabrication process of Pre-insulated Air Ducts

making straight duct model

Core Performance Advantages of Pre-insulated Panels

Exceptional insulation and energy efficiency: The core material has a closed-cell rate of over 90%, with a thermal conductivity of only 0.018-0.022 W/m·k. This is far superior to traditional insulation materials, reducing heat loss by 20%-30% and lowering the annual energy consumption of the air conditioning system by over 12.7%.


Comprehensive safety protection: The fire resistance rating reaches BS 476 Part 6&7 Class 0 or non-flammable B1 grade. When burning, it forms a carbon layer to block the flame, without releasing harmful gases; the aluminum foil surface is coated with a corrosion-resistant layer, with an absorption rate of ≤0.25%, preventing moisture absorption, bacteria growth, and rusting.


Low-noise and quiet characteristics: The foam core material also has an acoustic absorption function, capable of absorbing air turbulence and equipment vibration noise. The insertion loss is 15-22 dB(A), improving the comfort of the indoor acoustic environment.


High airtightness guarantee: The integrated molding structure combined with special sealing components results in a leakage rate of ≤0.81/s.m² (under a wind pressure of 1000 Pa), which is 1/8 of that of traditional ducts, avoiding energy waste and air flow loss.

Structure and Material Design of Pre-insulated Panels

 

Composite Structure Science: Utilize a "aluminum foil + foam core material + aluminum foil" sandwich structure. The thickness of the aluminum foil ranges from 60 to 200 micrometers, with a compressive strength of 0.25 MPa and a bending strength of 2 MPa. This design balances structural stiffness and flexibility, making it less prone to breaking or shedding debris.


Flexible Specifications: The thickness ranges from 10 to 40 mm. Standard sizes include 3950 × 1200 mm, etc. Customized production is supported, and it can be adapted to different wind pressures (up to 13-20 m/s wind speed) and temperatures (-25°C to 80°C).


Environmental Material Selection: Free of harmful substances such as CFC or HFC, the formaldehyde emission is ≤ 0.03 mg/m³. Some products have obtained GreenGuard Gold certification, meeting the environmental requirements of green buildings and being recyclable.

PIR Duct

Construction and Cost Efficiency of Pre-insulated Panels

PIR Air Duct Panels

 

High construction efficiency: The single weight is only 1.4 kg/m², which is 1/10 of that of traditional ducts, and the average daily installation area per person reaches 35㎡, which is 1.5 times that of phenolic ducts; it supports BIM modular design, and on-site cutting and splicing are convenient, without the need for wet welding operations.


Lower overall cost: The initial investment is 20%-30% lower than that of traditional ducts, reducing the material and labor costs for the insulation layer installation; the service life is 4-6 times that of traditional ducts, and there is no need for major repairs for 20 years, reducing the total life cycle cost by 19.6%.


Easy maintenance and worry-free: The surface is smooth and easy to clean, there is no risk of pest infestation or mold, the aluminum foil coating is corrosion-resistant, and there is no need for frequent maintenance on a daily basis; during maintenance, only local replacement of seals or panels is required.

Market and Policy Alignment of Pre-insulated Panels

 

Policy Benefits: Compliant with the "General Specifications for Building Energy Conservation and Renewable Energy Utilization", 27 provinces have included it as a bonus item for green buildings. Some regions offer an 80-yuan subsidy per square meter.


Clear Trend of Replacement: Compared to galvanized steel sheet ducts, it has significant advantages in energy efficiency, weight, and construction efficiency. The market share of leading enterprises totals 61.3%, while small and medium-sized enterprises are accelerating their exit, leading to an increase in market concentration.


Technical Upgrade Direction: Moving towards high-density (≥64kg/m³) and antibacterial rate ≥99% super composite materials. Some products integrate electromagnetic shielding and self-cleaning functions, suitable for high-end scenarios such as data centers.

polyisocyanate duct

 

 

Hot Tags: pre-insulated panels, China, suppliers, manufacturers, factory, customized

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!