
PIR Foam Pre-insulated Aluminum Duct
PIR Foam Pre-insulated Aluminum Duct is a high-performance ventilation duct product, which is widely used in HVAC systems. The following is a detailed introduction:
Basic Structure: It is a sandwich structured panel. The core is polyisocyanurate (PIR) foam, which is a closed-cell insulating material. The two outer layers are aluminum sheets or aluminum foils. For example, the UNTDuct PIR pre-insulated panel has a structure of silver aluminum / PIR foam / silver aluminum, and the foam density is 55 kg/m³.
Standard Dimension: 3950*1200*20mm/ 2900*1200*20mm
Main performance of PIR Foam Pre-insulated Aluminum Duct
Excellent Thermal Insulation Performance: The thermal conductivity of PIR foam is very low, generally between 0.018 - 0.022 W/(m·K). This allows the PIR foam pre - insulated aluminum duct to effectively reduce heat transfer, maximize the utilization of air - handling unit capacity, improve efficiency, and reduce operating costs.
Good Fire - resistance: PIR foam pre - insulated aluminum duct has good flame - retardant properties. Its fire rating can reach Class 0 according to BS 476 Part 6&7, or B1 according to GB 8624 - 2006. When burning, it will form a char layer on the surface to isolate the underlying foam, effectively preventing the spread of flames and producing little smoke and no harmful gases.
Lightweight and Easy to Install: Compared with traditional sheet - metal ducts, PIR foam pre - insulated aluminum ducts are very lightweight, which can reduce the weight on the building structure and supporting points, as well as the cost of workmanship and installation materials. At the same time, it is easy to transport, handle, and construct, and can be installed indoors or outdoors, visible or hidden in false ceilings.
Good Air - tightness: The air - tightness of the PIR foam pre - insulated aluminum duct system is eight times higher than that of traditional ducts, which can effectively prevent air leakage and improve the efficiency of the ventilation system.
Hygienic and Clean: Using aluminum as the inner surface of the duct ensures hygiene and cleanliness, and the surface is not easy to be corroded and rusted. It has a beautiful appearance and is very suitable for industries with high - hygiene requirements such as the food industry, electronics, pharmaceuticals, hospitals, and medical centers.
Good Acoustic Performance: The sandwich structure of aluminum - insulating material - aluminum can effectively absorb vibration and reverberation, reduce noise, and contribute to creating a more comfortable environment.
How to make Air Ducts with PIR Foam Pre-insulated Aluminum Duct
The fabrication process of Pre-insulated Air Ducts






|
Item |
Unit |
Specification |
|
Panel Structure |
|
Alu./Foam/Alu. |
|
Standard Panel Size |
mm |
3950*1200*20 |
|
Alu. Foil Thickness |
mm |
0.06 |
|
Foam Density |
kg/m3 |
48 |
|
Thermal Conductivity |
w/m.k |
0.022 |
|
Compressing Strength |
Mpa |
0.2 |
|
Bending Strength |
Mpa |
2 |
|
Water Absorption |
% |
0.36 |
|
Dimension Change |
% |
0.3 |
|
Working Temperature |
℃ |
-100 to +80 |
|
Maximum Allowable Wind Velocity |
m/s |
≤12 |
|
Continuous Running Maximum Temperature |
℃ |
≤70 |
|
Lifespan of PU Air Duct |
years |
>20 |
Hot Tags: pir foam pre-insulated aluminum duct, China, suppliers, manufacturers, factory, customized
